Allgemeine Informationen

IMO:
7716763
MMSI:
304048000
Rufzeichen:
V2GQ4
Breite:
15.0 m
Länge:
106.0 m
DWT:
Gross Tonnage:
TEU:
Liquid Capacity:
Baujahr:
Klasse:
AIS Typ:
Cargo Ship
Ship type:
Flagge:
Antigua and Barbuda
Hersteller:
Eigner:
Operator:
Versicherer:

Kurs/Position

Position:
AIS Status :
Moored
Kurs:
360.0° / -128.0
Kompasskurs:
511.0° / -128.0
Geschwindigkeit:
Max. Geschwindigkeit:
Status:
moored
Location:
Altinova (Sener shipyard)
Gebiet:
Turkey
Zuletzt empfangen::
2026-11-08
vor 3 Min
Source:
T-AIS
Von:
Zielort:
ETA:
Summer draft:
Current draft:
Letztes Update:
vor 6 Min
Source:
T-AIS

Nicht sichtbar mit Ihrem Account? Hier Upgraden...

Upgrade

Die letzten Häfen

Bitte anmelden, um die letzten port calls zu sehen

Log in

Die letzten Wegpunkte

Bitte anmelden, um die letzten wegpunkte zu sehen

Log in

Die neuesten Nachrichten

Grounding off Terneuzen

Tue May 13 13:04:23 CEST 2025 Timsen

On the morning of May 1, 2025, the 'Cement Trader', en route from Setubal to Terneuzen, ran aground just before the entrance of the Western foreport of Terneuzen with a draft of 07.10 metres. It got stuck between the Dow Schelde jetty and the foreport. The tugs 'Multratug 16' and 'Multratug 13' as well as the 'VB Triumphante', which joined later to assist, and the 'Patrol' were on scene soon after and managed to refloat the ship, which was then moored at the poles in the Western foreport of Terneuzen for inspections. The ship left the port again on May 5, headed back to Setubal, where it arrived on May 9. Report with photos: https://www.tugspotters.com/app/content/2025/05/multratugs-trekken-vastgelopen-cement-trader-terug-vlot-na-stranding-op-westerschelde/

Double trouble with cooling pump

Sat Jan 18 21:24:31 CET 2020 Timsen

The 'Cement Trader', en route from Bremerhaven to Setubal, suffered trouble with the cooling system in the main engine in position 50 03 36.0 N, 002 43 06.0 W on Jan 17, 2020, at 4.50 p.m. After the repairs were completed, the vessel was underway again at 6.10 p.m. On Jan 18 at 1.20 a.m. another repair to the cooling pump in the main engine became necessary. The MRCC was in communications with the vessel. At 2.20 a.m. the problem has been rectified and the vessel was back underway, bound for Augusta with an ETA as of Jan 25.

News schreiben

Ship master data