HAVELLA
Die letzten Häfen
Die letzten Wegpunkte
Die neuesten Nachrichten
Wreck finally pulled onto the shore
On the morning of Oct 23, several workers from Berlevåg were busy to pull the 'Havella' over the rocks onto the shore, using machines of the Hydraulikk Finnmarl. After a few hours of work, three wheel loaders and two excavators had the wreck completely up on the shore at around 2 p.m., where it can be cut up and properly disposed of. Report with photos: https://www.berlevaagnytt.com/?p=63647
Wreck pulled further to shore
On oct 22, the work of pulling the 'Havella' by the contracted company Hydraulikk Finnmark closer to land was in full swing, using a period of good weather and the sea being at full tide. Berlevåg Maskin was providing the machinery, consisting of excavators and bulldozers, needed for this task. The wreck was now resting on its port side, showing the completely destroyed ship's bottom. Report with photos and video: https://www.berlevaagnytt.com/?p=63518
Wreck to be cut up on the rocks
The insurance company Marine at Granne Insurance, responsible for the "Havella" in Berlevåg, which capsized in the shallow waters east of the breakwater at Berlevåg port, was preparing the removal of the wreck. After the Coast Guard was unable to pull the vessel off, it was pushed further and further in, where the rocks sticking up from the sandy bottom tore up the hull, so that the ship was declared a total loss. In recent days loose objects that have come off the ship, were removed, as well as some loose equipment. The entire port side has been demolished, so that debris from the interior was coming out and washing up on the shore. As a salvage from the sea was not considered as realistic, the wreck was to be pulled further up to be removed from land with local companies, The plan is to cut the 'Havella' apart where it is located. The Berlevåg based company Hydraulikk Finnmark, has taken on the task of removing the wreck. Workers have been able to attach a couple of proper straps to solid attachment points. The company has two crawler excavators, one of 15 and one of 26 tons. The strategy was to get hold of hydraulic shears that can be mounted on a crawler excavator and go down to the wreck position about 200 meters from shore. The wreck could be pulled upright on Oct 21. Reports with photos: https://www.berlevaagnytt.com/?p=63381 https://www.berlevaagnytt.com/?p=63361 https://www.berlevaagnytt.com/?p=63437
News schreiben