General information

IMO:
9587867
MMSI:
219423000
Callsign:
OXML2
Width:
27.0 m
Length:
169.0 m
Deadweight:
Gross tonnage:
TEU:
Liquid Capacity:
Year of build:
Class:
AIS type:
Passenger ship
Ship type:
Flag:
Denmark
Builder:
Owner:
Operator:
Insurer:

Course/Position

Position:
Navigational status:
Moving
Course:
360.0° / 0.0
Heading:
127.0° / 0.0
Speed:
Max speed:
Status:
waiting
Area:
Denmark
Last seen:
2026-11-08
1 min ago
Source:
T-AIS
From:
Destination:
ETA:
Summer draft:
Current draft:
Last update:
1 min ago
Source:
T-AIS

Not visible with your account? Upgrade here...

Upgrade

Latest ports

Please log in to see latest port calls

Log in

Latest Waypoints

Please log in to see latest waypoints

Log in

Latest news

Ferry could not sail

Thu Jul 23 19:05:08 CEST 2026 Timsen

On July 19 Scandlines experienced problems at the ferry port in Rostock, as the 'Copenhagen' was unable to sail due to technicalproblems. At noon the ferry was emptied of cars and passengers. At the same time, the ferry from Gedser, the 'Berlin' could not dock. Free soda has been handed out. Scandlines recommend instead to travel via Rødby-Puttgarden. Normal service was resumed at 2.40 p.m.

Sailings cancelled due to medical emergency

Thu Dec 29 18:51:54 CET 2022 Timsen

Scandlines had to cancel two sailings of the 'Copenhagen' on Dec 28, 2022, due to a medical emergency on board. The sailings at 3.45 p.m. from Gedser and at 6 p.m. from Rostock were affected. The ferry finally left Gedser at 8.20 p.m. UTC.

Ferry to be equipped with rotor sail

Thu Aug 15 12:03:44 CEST 2019 Timsen

Sandlines announced that it has signed an agreement with Norsepower to install the company's Rotor Sail Solution onboard the "Copenhagen" which is operating between Rostock and Gedser. The Norsepower Rotor Sail Solution is a modernized version of the Flettner rotor – a spinning cylinder that uses the Magnus effect to harness wind power to thrust a ship, according to a press release. It is the first data-verified and commercially operational auxiliary wind propulsion technology for the global maritime industry. When wind conditions are favorable, it enables the electric propulsion thrusters and center propel to be throttled back, reducing emissions – while providing the power needed to maintain speed and voyage time. Preparations for the retrofit will take place in November 2019 with the installation scheduled for Q2 2020 as the ship will be retrofitted with one large-sized Norsepower Rotor Sail unit that is 30m in height and 5m in diameter. Scandlines hoped by installing a Rotor Sail to reduce CO2 emissions on the Rostock-Gedser route by four to five per cent.

Upload News

Ship master data