General information

IMO:
MMSI:
211168000
Callsign:
DCCD
Width:
5.0 m
Length:
15.0 m
Deadweight:
Gross tonnage:
TEU:
Liquid Capacity:
Year of build:
Class:
AIS type:
Fishing Boat
Ship type:
Flag:
Germany
Builder:
Owner:
Operator:
Insurer:

Course/Position

Position:
Navigational status:
Fishing
Course:
155.7° / 0.0
Heading:
105.0° / 0.0
Speed:
Max speed:
Status:
waiting
Area:
North Sea
Last seen:
2026-11-11
2 min ago
Source:
T-AIS
From:
Destination:
ETA:
Summer draft:
Current draft:
Last update:
1 min ago
Source:
T-AIS

Not visible with your account? Upgrade here...

Upgrade

Latest ports

Please log in to see latest port calls

Log in

Latest Waypoints

Please log in to see latest waypoints

Log in

Latest news

Disabled cutter towed to Heligoland

Fri Mar 20 21:12:07 CET 2020 Timsen

On March 20, 2020, at 3.30 a.m. the 'Martje - GRE 5' issued a distress signal after having suffered an engine failure following an electrical short circuit. The vessel with two crew members on board was adrift about 12 nautical miles North of Heligoland and only 1,5 nautical miles away from an offshore wind farm. The currents drifted the disabled ship with three knots towards the installations. The nearby f/v 'Nordlicht' took the 'Martje' in tow and managed to maintain its position until the lifeboat 'Hermann Marwede' had arrived from the DGzRS station Heligoland. The tow was transferred onto the lifeboat which safely pulled the 'Marttje' into the island port with the two fishermen remaining on their ship. The operation was supported by weak NW winds and good visibulity. The fishing vessel left Heligoland again on March 20 at 8.40 a.m. after the damage was fixed, and arrived in Norddeich at 2.20 p.m. German report with photo: https://www.seenotretter.de/aktuelles/seenotfaelle/ansicht/news/fischkutter-droht-in-windpark-zu-treiben-seenotretter-sind-zur-stelle/

Upload News

Ship master data