General information

IMO:
9306433
MMSI:
255806135
Callsign:
CQAC5
Width:
18.0 m
Length:
108.0 m
Deadweight:
Gross tonnage:
TEU:
Liquid Capacity:
Year of build:
Class:
AIS type:
Cargo Ship
Ship type:
Flag:
Portugal
Builder:
Owner:
Operator:
Insurer:

Course/Position

Position:
Navigational status:
Moored
Course:
209.7° / 0.0
Heading:
245.0° / 0.0
Speed:
Max speed:
Status:
moored
Location:
Gandia (Gandia Port)
Area:
Spain
Last seen:
2026-11-08
4 min ago
Source:
T-AIS
From:
Destination:
ETA:
Summer draft:
Current draft:
Last update:
3 min ago
Source:
T-AIS

Not visible with your account? Upgrade here...

Upgrade

Latest ports

Please log in to see latest port calls

Log in

Latest Waypoints

Please log in to see latest waypoints

Log in

Latest news

Engine failure in Dardanelles Strait

Wed Jul 16 09:25:51 CEST 2025 Timsen

On July 14, 2025, at around 11 p.m. UTC, the 'Spanaco Progress', en route from Tarragona to Kocaeli, suffered an engine failure off the Gallipoli coast during the transit of the Dardanelles Strait (Lat. 40.4085 Lng. 26.7232)(. The two tugs 'Kurtarma 3' (IMO:: 9335939) and 'Kurtarma 19' (IMO: 9995129) as well as a pilot were immediately called to assist. The 'Kurtarma 19' took the ship in tow at around 11.40 p.m. and pulled it to the Şevketiye Anchorage Area at a speed of about four knots under the coordination of the Çanakkale Ship Traffic Services Center. The ship was moored in pos. 40° 25' N 026° 50' E on July 15 atr around 1 a.m., where it remained stationary as of July 16. Video: https://x.com/i/status/1945009907377349048

Disabled bulkcarrier towed to Brest

Thu Mar 21 11:45:01 CET 2019 Timsen

After spending the last weekend at anchor off the Belle-Ile where the crew tried to repair a propulsion damage, the "Spanaco Progress" was towed to Brest in the afternoon of March 19, 2019, by the tug "Amber II" where the tugs "Clairvoyant" and "Robuste" took over and pulled it to No. 4 repair dock of the CIB Brest Shipyard at 4.30 p.m., where technicians of the the Damen Shipyard will repair the ship's engine, a seven-cylinder STX MAN with a power of 3,807 horsepower. Spare parts were sent by the engine manufacturer. The freighter had a cargo of 6,000 tons of quartz on board and had sailed from Port Said on Feb 9. It left Brest again on April 4 at 5 p.m. and headed towards the English Channel. French report amd photos: https://www.letelegramme.fr/finistere/brest/port-de-commerce/spanaco-prograss-remorque-a-brest-apres-une-panne-de-moteur-20-03-2019-12237599.php http://www.shipspotting.com/gallery/photo.php?lid=2981402# http://www.shipspotting.com/gallery/photo.php?lid=2981405 http://www.shipspotting.com/gallery/photo.php?lid=2981404

Upload News

Ship master data